Bicycle Cover for Carrying Children On the Back 210D Thick

• [Thick 210D Oxford Fabric] Made of thick 210D Oxford fabric.Prevents rain, dust, bird droppings, etc. from directly adhering to the bicycle, and supports outdoor storage.It is less likely to tear than thin covers, and is easy to put on and take off on a daily basis. • [Water repellent finish and UV protection] The fabric surface is treated with water repellent finish to reduce the adhesion of rainwater and dirt.Rain protection is also applied to the seams where water can easily enter.Furthermore, the coating on the back side reduces the effects of sunlight and UV rays on the car body paint, saddle, grips, etc.Since it is not completely waterproof, please refrain from using it in areas exposed to heavy rain or where water accumulates for long periods of time. • [Compatible with bicycles that carry children on the back] The main body size is approximately 200 x 75 x 115 cm.It has a tall design that makes it easy to cover a child's bicycle with a child seat attached to the back.Although it is intended for bicycles up to 29 inches, the shape of the body and child seat may differ even if the number of inches is the same, so please check the overall dimensions of the bicycle before purchasing. • [Adjustable with zipper and snap button] The cover is equipped with a zipper and snap button, allowing you to adjust the condition of the cover to match the shape of the bicycle or child seat.In addition to bicycles with rear child seats, if the overall dimensions fit within the cover, it can also be used on bicycles with infant seats attached to the front and rear. • [Elastic hem and windproof buckle for wind protection] Elastic rubber is used on the front and rear hems to fit along the underside of the vehicle.By securing the cover with a windproof buckle, it reduces wind-induced flipping, shifting, and flapping.During strong winds such as typhoons or gusts, remove the cover and store it in a safe place. • [Lock hole and dedicated storage bag included] The front wheel side has a reinforced lock hole that allows you to pass wire locks, etc. through.It is easy to lock even with the cover on, and is also useful as a landmark for checking the front and back.When not in use, you can store it in the included storage bag.Wire lock or key not included.

## Product specifications Approximate compatibility: Bicycles up to 29 inches Compatible types: Bicycles with rear child seats, bicycles with front and rear child seats that fit within the size Body dimensions: approx. 200 x 75 x 115cm Dimensions: length x width x height Material: 210D Oxford fabric Processing: Surface water repellent, back coating Specifications: Elastic hem, windproof buckle, lock hole, zipper, snap button Accessories: Dedicated storage bag *Even if the number of inches is the same, it may not be possible to use it depending on the shape of the bicycle or child seat. ## Precautions for use This product is a bicycle cover to reduce the adhesion of rain and dirt.It is not completely waterproof. Do not use in locations subject to prolonged heavy rain, submergence, or standing water. If a typhoon, gusts, or strong winds are expected, remove the cover. Do not ride your bicycle with the cover attached. Do not use the cover with a child in a child seat. If the product is hooked too tightly to protruding parts such as pedals, stands, baskets, child seats, etc., the fabric may be damaged. Do not pull the zipper or snap button forcibly or operate it with strong force. The bicycle and the inside of the cover may become hot immediately after riding or after using it in the hot sun. If it gets dirty, do not use a washing machine, but wipe it with a soft cloth dampened with water. Do not store it wet; dry it thoroughly in a shaded area with good ventilation. ## Frequently asked questions Q: Can it be used on a bicycle with a child seat in the back? A: It is designed with a height of approximately 115cm, assuming that a child can be carried on the bicycle in the back.However, the fit will vary depending on the shape and height of the child seat, so please check the overall dimensions of your bike before purchasing. Q: Can it be used on bicycles with child seats in the front and rear? A: It can be used if the overall dimensions including the child seat are within approximately 200 x 75 x 115 cm.If you have a large front basket or a specially shaped seat, the cover may not reach all the way to the bottom. Q: How many windproof buckles are included? A: Please check the product image and the actual item for the quantity of windproof buckles.This product comes with a windproof buckle to secure the cover. Q: Does it have a lock hole? A: There is a reinforced lock hole on the front wheel side that can be used to pass wire locks, etc. Q: Is a wire lock included? A: The accessories are the bicycle cover itself and a special storage bag.Please prepare a wire lock and key separately. Q: Can it be washed in a washing machine? A: Do not use a washing machine as this may damage the water repellent finish or back coating.Wipe with a soft cloth and dry thoroughly in a shaded area with good ventilation.