Bms 2S 3S 4S Active Balancer Board 1.2A Lifepo4 Lipo Li-Ion Lithium Battery Energy Transfer Equalizer Module Inductive Version… Vairāk

Precautions This board is based on the principle of adjacent equalization and cannot be used as a maintenance tool. To connect to the battery, it must be used with the lithium battery protection board. The pressure difference generated by charging and discharging triggers the work of the equalization board to achieve energy transfer and balance. Inductive energy transfer balance board, high current 1.2A energy transfer battery voltage balancer, significantly balance the battery voltage and improve the overall use efficiency of the battery pack! Inductive working principle This module is the adjacent voltage difference equalization, the adjacent battery voltage difference reaches more than 0.1V, the chip internal triggers the equalization work, until the adjacent battery voltage difference is within 0.03V and stops working, when it is used on the battery pack, there is adjacent voltage difference when charging and discharging Triggering the equalization work, the battery pack voltage error will also be pulled back to an ideal value, reducing battery maintenance costs. Wiring Definition B-: The total negative pole of the battery pack (the negative pole of the first battery) B1: Positive pole of the first battery B2: Positive pole of the second battery B3: Positive pole of the third battery B4: Positive pole of the fourth battery B. . . . . . N+ and so on Notice: More than 13 series cable plugs need to be inserted obliquely, first contact the B- pin and insert it obliquely upward, otherwise it may cause the board to burn. Technical Parameter 1. Working voltage: 2.0V-4.5V 2. Universal ternary iron lithium battery 3. LTO battery is not applicable! ! ! Balance Instructions 1. When the equalization light is on, the equalization work is turned on 2. The equalization light is off, and the equalization circuit is in sleep state 3. The equalization light flashes, indicating that the string is dropped, or the circuit is faulty. Balance current 1、The adjacent voltage difference is more than 0.1V (the current is about 0.5-0.7A) 2、Adjacent voltage difference is more than 0.2V (maximum equilibrium current is 1.2A) 3、The smaller the voltage difference, the smaller the equalizing current. The merchant warrants that their products comply with all applicable laws, and are offered only if they comply with Joom's policies and EU Product Safety and Compliance laws.