Anti Clogging Wash Basin Drain Gold Basin Drain Accessories Sink Drain Stopper Bathroom Use

Label:Yes BRASS AND STAINLESS STEEL MATERIALS: The main drain components are made from brass, featuring a polished brass surface for a clean appearance in bathroom and kitchen settings. The tail pipe is made from stainless steel to provide a firm structure for regular household use and support continued connection with the lower drainage pipe BASIN SIZE AND DIMENSIONS: Suitable for basin mounting holes measuring 41 to 50 millimeters in diameter. The top cap measures approximately 60 millimeters in diameter, the button measures approximately 35 millimeters in diameter, and the thread measures approximately 41 millimeters in diameter. The top section height is approximately 70 millimeters FLAP STOPPER DESIGN: The top flap opens to allow water to pass through the outlet and closes to retain water in the basin when needed. This direct control method supports daily hand washing, dish washing, and basin cleaning while allowing smooth drainage after use. The design is suitable for users who need convenient water flow control at the basin TAIL PIPE AND SEALING PARTS: The stainless steel tail pipe measures approximately 31 millimeters in diameter and 120 millimeters in length, while the total drain height is approximately 190 millimeters. Mounting hardware and a soft silicone gasket are included. Position the gasket correctly during installation to support a close seal, smooth drainage, and convenient removal for routine maintenance BASIN DRAIN WITH TWO OPTIONS: Available in versions with an overflow opening and without an overflow opening for bathroom and kitchen wash basins. Choose the version that matches the basin design to support proper water drainage and help prevent fitting problems during installation. The flap style stopper opens and closes at the basin outlet to control water storage and wastewater flow

Specifications: Item Type: Sink Drain Material: Brass, Stainless Steel Color: Gold Process Treatment: Electroplating Type: Flap Optional Style: Without Holes, With Holes Size: Fits basin diameter: 41-50mm / 1.61-1.97in Top Cap Diameter: Approx. 6cm / 2.36in Button Diameter: Approx. 3.5cm / 1.38in Thread Diameter: Approx. 4.1cm / 1.61in Pipe Diameter: Approx. 3.1cm / 1.22in Top Section Height: Approx. 7cm / 2.76in Tail Pipe Length: Approx. 12cm / 4.72in Total Height: Approx. 19cm / 7.48in Weight: Approx. 350g / 12.35oz

Installation 1. Take out the head of the drainer first, and gently put it into the sink drain hole 2. After leveling and volume, as shown in the figure above 3. Then put the ring pad at the bottom, screw on the fixing nut, and tighten it with a wrench 4. After fixing the drainer as shown above, the drain installation is complete, just connect the upper and lower water pipes

Package List: 1 x Sink Drain 1 x Protective Cover

Notes: 1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness. 2. Please allow slight manual measurement deviation for the data.