Turbo VGT Tune-up Kit- Vane Position Sensor + VGT Solenoid For Duramax 2004 2016

Turbo VGT Tune-Up Kit- Vane Position Sensor + VGT Solenoid For Duramax 2004 - 2016 VGT Tune-UP Kit fits 2004.5 - 2016 INCLUDES： VGT Solenoid AND Vane Position Sensor（1 Set） Is your VGT Turbo not working correctly? In some cases is may make sense to replace the vane position sensor and the solenoid together since they are both fairly commonly needed parts and diagnosing which of the two is causing certain issues can be challenging, especially when the problem is intermittent. Variable geometry turbocharger allows one turbo to effectively take the place of two. At low RPM's the vanes are configured to make the turbo spool up quickly to minimize lag, at higher RPM's the vane angle is changed to perform like a larger turbo. The variable geometry system uses a PCM commanded electric solenoid to control the flow of pressurized engine oil which moves a piston to control the movement of the variable vanes. A variable geometry turbo that is not working correctly will cause your truck to either be slow taking off or lacking in top-end performance depending on what position the vanes are stuck in. The most common failure of the VGT turbocharger is a stuck unison ring, or stuck vanes. Before replacing your actuator, it is advisable to disassemble the exhaust side of the turbo which is a relatively simple process and ensure that everything moves freely and that the unison ring is not worn. A wear spot where the actuator arm contacts the unison ring can cause a mechanical jamb. Please note that due to a GM design change, For 2004.5 - 2005 LLY models will require a wire harness adapter to plug the sensor into your original harness. Sensor replaces the following part numbers (and others): 763527-0712 12643471 12635324 98011739 98061570 904-235 763527-0007 19210790 Solenoid replaces the following part numbers (and others): 9806157 792593-0001